Step-by-Step Guide To Change A Tire

 You might come across a situation where you damage your car tire and you have to change it on your own. In such a situation, it’s necessary to have guidance about changing a tire. You should know how to properly do the procedure without sparing a lot of time by trying to change it without any guidance. First of all, you should have a spare tire and tire change tools in your car in case of emergency. It is very important as you can stuck in such a situation anywhere and anytime. Some areas are backward and you can’t find mechanics there easily. Or especially if you face such difficulty at night time, the situation can be more worst for you. You can contact the Towing Company Calgary to get 24/7 services. They provide tire change Calgary service in different areas. But on the safe side, Here’s a step-by-step guide for you to change a car tire:

Take The Tools Out Of Your Car

The very first step is to look for the material that is required for changing a car tire. Take all the essentials out of your vehicle including nut plucking tools to loosen the nuts of the tire and jack to lift the car. Take the spare tire and check it properly if it’s alright. Then start this step-by-step procedure of changing your car tire.

Lift The Car From The Level Of Ground

The very first step in changing a car tire is to lift your car from the side of the damaged tire/ or the tire you are going to change. You can use a jack to lift it. Place the jack in the best position under your car and start rotating the holder of the jack. The car will start to lift gradually. Lift it to a suitable level and you are ready for your next step.

Removing The Nuts And Damaged Tire

Once your car is lifted, you then place the tools on the lug nuts of the tire. Specific sized tools are used to lose those nuts that ultimately lose the tire from your car. After removing all the nuts, you are ready to take that damaged tire off the car and replace it with the new one. Place the new tire and tighten the lug nuts back on the tire. In case you have called for help, the Calgary tire change service will help you out throughout the process. 

Remove The Jack To Lower The Vehicle

After getting done changing your car tire, rotate the jack’s holder in opposite direction. It will lower the jack and your car will gradually come to the ground. Take the jack away and place it into your car. Place the damaged tire into your car as well. Check the nuts of the tire carefully. After satisfaction with the safety of this car change procedure, you can start your journey.

If you want to get the best services that also save your time, then look for the most reliable towing service. Only a well-reputed company can serve you well.